• The Street series suspension is the default configuration suggested by MTS Technik engineers, guaranteeing a wide range of lowering and a balance between comfort and stiffness.

• BMW: 1602 1967 - 1968
• BMW: 1602 1967 - 1968
• BMW: 1602 1967 - 1968
• BMW: 1602 1967 - 1968
• BMW: 1602 1967 - 1968
• BMW: 1602 1967 - 1968
• BMW: 1602 1967 - 1968

Attributes:

• Brand Name: MTS Technik
• GTIN: 05903855622876
• Additional information: strut diameter at the front axle of 52 mm
• Camber / top mount FA: yes
• Camber / top mount RA: no
• Coilover Helper Spring (Front): Spring rate (20 N/mm)
• Coilover Helper Spring (Rear): Spring rate (20 N/mm)
• Coilover Main Spring (Front): Spring rate (70 N/mm)
• Coilover Main Spring (Rear): Spring rate (60 N/mm)
• Housing: Inox
• Product notes: 2 - Front and rear axle height adjustable (threaded shock absorber housing)., 21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 26 - Independent height adjustment at the lower brackets on the front dampers., 28 - Set includes 2x upper "camber plates" on the front axle., 29 - The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual., 32 - In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set., 33 - Including M-Technik.
• Series: Street

Extended Information:

• Country of Origin: PL
• Emissions : Emissions Compliance Exempt
• Life Cycle Status: Available To Order

Packing Information:

• Quantity of Each: 1
• Package UOM: ST
• Dimension: 25 x 18 x 9 inches
• Weight: 22 POUNDS