• The Street series suspension is the default configuration suggested by MTS Technik engineers, guaranteeing a wide range of lowering and a balance between comfort and stiffness.

• Audi: A3 2016 - 2016
• Audi: A3 2016 - 2016

Attributes:

• Brand Name: MTS Technik
• GTIN: 05903855625556
• Camber / top mount FA: yes
• Camber / top mount RA: no
• Coilover Main Spring (Front): Spring rate (32 N/mm)
• Housing: Inox
• Product notes: 3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)., 8 - Not for 4x4., 19 - Only for vehicles equipped with a one-piece leaf spring on the rear axle. If the vehicle is equipped with a two-part leaf spring on the rear axle a one-piece leaf spring has to be purchased seperately (while used in a Caddy - use VW part no. for leaf spring spring 2K0 511 151 N, while used in a Caddy Maxi use VW part no. for leaf spring spring 2K3 511 151 E)., 21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 44 - Installation of the rear axle adjustment must be carried out in accordance with the instructions., 45 - Front and rear axle height adjustable (threaded shock absorber housing on the front, provided adjustment plates + shock absorbers on the rear axle)., 73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
• Series: Street

Extended Information:

• Country of Origin: PL
• Emissions : Emissions Compliance Exempt
• Life Cycle Status: Available To Order

Packing Information:

• Quantity of Each: 1
• Package UOM: ST
• Dimension: 25 x 18 x 9 inches
• Weight: 22 POUNDS