Front Center LED Light Bar Headlight for Model Y Juniper | PN 2038294
$389.00 USD
Sale price
$389.00 USD
Regular price
$399.00 USD
Skip to product information
Model Y Juniper (2025+)
Front Center LED Light Bar Headlight for Model Y Juniper | PN 2038294
$389.00 USD
Sale price
$389.00 USD
Regular price
$399.00 USD
Model Y Juniper (2025+)
Front Center LED Light Bar
⚠️ Pre-Purchase Fitting Note: This part (PN 2038294) fits only the refreshed Tesla Model Y Juniper (2025–2026). Please verify your existing part number contains the root sequence 2038294 before ordering. Installation requires removing the upper frunk underhood storage liner and four 10mm bolts. Always power off the vehicle via the center screen before disconnecting the lighting harness.
1:1 OEM-Grade Mold
Engineered to factory tolerances using a 1:1 OEM-grade mold. Matches Tesla's native three-piece front fascia design — center bar gaps align perfectly with side headlights, no warping or misalignment.
100% Plug-and-Play
Internal circuit boards and connectors are fully synchronized with Tesla's CAN bus. Disconnect the broken unit, bolt in the new one via the original 4-bolt module, click in the factory harness — zero coding, zero error codes.
Perfect Road-Debris Replacement
The wide, exposed front center bar is a prime target for highway debris. Our OEM-spec, UV-stabilized polycarbonate lens matches original factory standards for optical clarity and impact resistance — the perfect direct-fit restoration for a cracked or pitted factory lens.
Also refreshing your Juniper's side headlights? View the complete Model Y Juniper LED Headlight Replacement (PN 1918347 / 1918348) — the matching lower main beam units for a full front lighting refresh.
Technical Specifications
Detailed technical information for the Model Y Juniper front center LED light bar assembly.
| Vehicle Fitment | Tesla Model Y 'Juniper' Refresh (2025–2026) |
|---|---|
| Placement | Front Center Light Bar (Grille-Spanning DRL / Position Light) |
| OEM Part Number | 2038294-00-C / 2038294-00-E / 2038294-00-B |
| Design | Three-Piece Front Fascia — Center Bar Unit |
| Lens Material | High-Impact UV-Stabilized Polycarbonate (Anti-Chip, Anti-Haze) |
| Installation | 100% Plug & Play — 4 × 10mm Bolts + OEM Harness Connector |
| CAN Bus Compatibility | Fully Synchronized — No Fault Codes Guaranteed |
| Compatible Firmware | Tested on Tesla Firmware 2025.x / 2026.x |
Installation Advisory
Follow these steps to ensure a safe, fault-free installation.
| Step 1 — Power Off | Fully power off the vehicle via the center touchscreen before touching any lighting harness to prevent transient CAN bus diagnostic faults. |
|---|---|
| Step 2 — Access | Remove the upper frunk underhood storage liner to expose the center light bar mounting area. |
| Step 3 — Remove | Unplug the factory harness connector, then remove the four 10mm bolts securing the center bar. |
| Step 4 — Install | Seat the new unit into the original mounting module, torque the four 10mm bolts, and click the factory harness into place. |
| Step 5 — Verify | Power on the vehicle and confirm no fault codes appear on the instrument cluster. No software programming required. |
Frequently Asked Questions
Common questions about the Model Y Juniper front center LED light bar (PN 2038294).
Q1: Will this front center light bar fit earlier Tesla Model Y vehicles (2020–2024)?
No. This part (PN 2038294) is exclusively designed for the refreshed Tesla Model Y (Juniper update, 2025–2026). It features a completely different shape, wiring harness, and mounting structure compared to pre-refresh models. Please verify your vehicle's front fascia design and confirm your existing part number contains the root sequence 2038294 before purchasing.
Q2: Does this replacement resolve panel gap or alignment issues with the front bumper?
Yes. Our replacement bar is engineered strictly using a 1:1 OEM-grade mold. Tesla's native design for the Juniper front end features a brief intentional break (gap) between the center bar and side headlights — this is by design, not a defect. Our hardware matches original factory placement perfectly, meeting factory alignment tolerances without looking uneven or warped.
Q3: Is this a true Plug-and-Play unit, or does it require Tesla software programming?
It is 100% Plug-and-Play. The internal circuit boards and connectors are fully synchronized with Tesla's native CAN bus hardware. Simply disconnect your broken unit, bolt the new one into the original 4-bolt mounting module, and click in the factory harness — no vehicle programming, no flashing, and no error codes guaranteed.
Q4: Is this replacement lens durable enough to withstand highway rock chips and debris?
Yes. Positioned at the very front of the fascia, the Juniper light bar is highly vulnerable to road impacts. Our replacement features an OEM-spec, UV-stabilized polycarbonate lens that matches original factory standards for optical clarity and impact resistance. It is the perfect direct-fit restoration for a factory lens that has been cracked or pitted by highway debris.
Q5: Do I also need to replace the side headlights (PN 1918347 / 1918348)?
The center light bar (PN 2038294) and the side headlight assemblies (PN 1918347 / 1918348) are separate units. If only your center bar is damaged, this product is all you need. If you are refreshing the full front lighting system, we recommend pairing this with our Model Y Juniper LED Headlight Replacement for a complete, matched set.