Performance Manufacturing 1/2" ID Kingpin Washer Kit - 7/8" OD - Universal Sprint Chassis

$11.90 USD
$11.90 USD
Performance Manufacturing 1/2" ID Kingpin Washer Kit - 7/8" OD - Universal Sprint Chassis

Performance Manufacturing 1/2" ID Kingpin Washer Kit - 7/8" OD - Universal Sprint Chassis

$11.90 USD
$11.90 USD

Dialing in the front-end geometry of your racing kart requires absolute precision, and eliminating spindle play is the first step to securing pole position. When you are pushing the limits of your chassis, even a fraction of a millimeter of slop in the kingpin assembly translates to unpredictable steering feedback and scrubbed speed through the apex. This Performance Manufacturing 1/2" ID Kingpin Washer Kit provides the exact shimming tolerances needed to lock down your front end, ensuring that every steering input is directly transferred to the track surface.

Maximize Chassis Efficiency and Briggs and Stratton LO206 Horsepower

Power delivery isn't just about tuning your go kart clutch or optimizing a belt drive system; it's about maintaining momentum. If your spindles are shifting under load, you are bleeding valuable speed. By utilizing this comprehensive 38-piece shim kit, you can perfectly align your kingpin bearings, reducing rolling resistance. This means you can maximize every ounce of your briggs and stratton lo206 horsepower, carrying higher exit speeds without fighting a wandering front end.

Precision Shimming for Go Kart Wheels Tires and Alignment

Proper caster and camber settings are useless if the spindle assembly shifts during high-G cornering. Whether you are running high-grip sprint compounds or standard go kart wheels tires, this kit allows you to fine-tune the vertical play on 1/2" kingpin bolts. The combination of 1/16" and 1/32" washers gives mechanics the micro-adjustment capabilities required for professional trackside tuning. Track conditions change rapidly, and having the right hardware on hand is critical for any serious competitor. This kit is a staple for any go karts supply box, ensuring you are never caught off guard during practice or qualifying sessions. Proper spindle shimming also extends the lifespan of your kingpin bearings by preventing uneven load distribution, saving you from costly mid-season rebuilds and keeping your kart on the track where it belongs.

  • 1/2" Inner Diameter: Precision-stamped to fit standard 1/2" kingpin bolts with zero radial slop.
  • 7/8" Outer Diameter: Provides optimal surface area contact for kingpin bearings and spindle yokes.
  • 36 Heavy-Duty 1/16" Washers: Forms the robust foundation for major gap bridging and structural support.
  • 2 Micro-Adjustment 1/32" Washers: Allows for ultra-fine tuning to eliminate the final thousandths of an inch of vertical play.
  • Complete Chassis Kit: Includes enough hardware to fully shim and rebuild both left and right spindle assemblies.
  • Friction Reduction: Prevents binding in the steering yoke, ensuring smooth, predictable steering inputs.
  • Universal Compatibility: Engineered for seamless integration with modern sprint, oval, and enduro racing chassis.

Frequently Asked Questions

Q: How do I know if I need to shim my kingpins?

A: If you notice vertical play or "slop" when grabbing the top and bottom of your front tires, your kingpin assembly likely needs shimming. Eliminating this play is essential for precise steering feedback and preventing the spindle from shifting under high-G cornering loads.

Q: How do I determine the correct number of washers to use?

A: Start by removing all existing shims and seating the spindle fully. Add 1/16" washers until the gap is nearly closed, then use the 1/32" micro-adjustment washers to achieve a snug fit that allows the spindle to rotate freely without binding. The goal is zero vertical movement while maintaining smooth steering action.

Q: Can I use these washers on any kart chassis?

A: Yes, this kit is designed for universal compatibility with standard 1/2" kingpin bolts found on most modern sprint, oval, and enduro racing chassis.

Q: Why is it important to use different thicknesses of washers?

A: The 1/16" washers are ideal for bridging larger gaps quickly, while the 1/32" washers allow for the fine-tuning required to eliminate the final thousandths of an inch of play, ensuring your front-end geometry remains consistent throughout the race.

Q: Does this kit cover both sides of the kart?

A: Yes, this 38-piece kit contains enough hardware to fully shim and rebuild both the left and right spindle assemblies on your racing kart.

Related Products From Vendor

You may also like